Interquartz manual Model IQ560E Features

	MODEL IQ560E FEATURES
CALL TIMER	See overleaf for more details
When a call is in progress, the word “TIMER” appears		STORE Button
on the display. When the call is terminated, the call
duration will be automatically displayed for 6 seconds.		Use to store memories. Any memory can store 24 digits with any combination of
		numeric entries plus PAUSE, , and Recall (Flash) commands.
16 digit LCD Display
Displays Clock, Call Timer and number dialed.		PAUSE Key
		Pause may be required if your phone is connected to any network where a 2
SET Key		second pause is needed during dialling. Lift the handset, dial any digits
Use to set the clock in 12-hour mode with PM indication		required before the pause, press Pause button, and dial remaining digits.
Hour (HR) and Minute (MIN) Keys		Ringer/Message Waiting Indicator
		Flashes when the telephone rings with an incoming call.
Press SET key then HR and MIN keys to set the clock.
		Built in message waiting suits both High Voltage (80 VDC) and Polarity Reversal
Press SET key again to complete the clock setting.
		types. (Other system types are optional).
BACKSPACE Key		Memory Keys
Deletes the last digit of a telephone number during memory		Upper row of 5 memory keys has both one and two touch memories and can be
storage.		protected to prevent over-writing - network facility codes may be programmed
		here for ease of use. Lower rows of 10 memory keys have one touch memories.
MUTE Button and Indicator		To store, lift HANDSET, press STORE, enter number, press Memory key and
		hang up. See overleaf for explanation of one-touch and two-touch memories.
Press to cut off transmission from the Handset, Headset and
Handsfree microphone to allow user privacy. The red light		Reset button
indicates when the mute condition is active. Press MUTE
again to release the mute condition.		Press this button to reset the telephone to normal if the telephone appears to
		be malfunctioning.
HANDSFREE button and indicator		The memories will not be erased when the button is pressed.
Press HANDSFREE to conduct a handsfree conversation. A
red indicator will glow. Press HANDSFREE again to turn it off.		RECALL Button
HEADSET button and indicator		For use with the host telephone system to invoke special network facilities such
		as call hold or call-transfer which may be available in your PABX or network.
Press the Headset button to conduct a call in HEADSET		See your telephone system user guide to learn how to use it. May be called
mode. The indicator glows when the HEADSET mode is		"Flash" or "Facility" key.
activated.		Flash timing is preset to 100mS.
Ringer Volume switch (Hi/Low/Off)
Selection of OFF (no sound), LOW volume, and
HIGH volume of the telephone's ringing sound.
When the switch is set to OFF, the ringing sound can
still be heard via the headset if connected to
the headset port (headset optional extra).		Handsfree microphone
Located on the underside.
		Reproduces your voice as you speak to the other party in HANDSFREE
Ringer Pitch Control	RINGER	mode. Keep clear of obstructions to enable clear reproduction of your voice.
	PITCH
Rotate the control to adjust the ringer pitch.		REDIAL Key
Located on the telephone's base.
		Press the button to redial the last number (max 32 digits).
	Figure 1
		To access a more detailed, downloadable user manual:
Handsfree volume slider	Earpiece volume slider	please visit our website at www.interquartz.com.au or www.telephones.com.au or
Adjusts the volume of sound from the speaker.	Adjusts the hearing level of the HANDSET / HEADSET.	call 1800 6 IQTEL (1800 647 835),
Located on the side of the telephone.	Set to midway for normal listening level.	send an email to enquiries@interquartz.com.au
	Located on the side of the telephone.

16 17