(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/28/2010

English 131

SETUP INSTRUCTIONS (continued)

Connecting the system to pump and pool with 1-1/2” (38mm) connections/hoses:

Pump and pool with 1-1/2” (38mm) connections do not require the adaptors A (1) or B (9). Install as follows:

Drawing #2

PLUNGER

VALVE

WATER TO

POOL SWIMMING POOL

WATER FROM

POOL

 

 

FILTER

 

 

PUMP

 

SALTWATER

8

ID 1-1/2” (38mm)

SYSTEM

ID 1-1/2” (38mm)

HOSE

 

 

HOSE

1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water, close the plunger valves before installing the Saltwater System.

2. Disconnect the water return hose from the filter pump connection and connect it to the Saltwater System outlet.

3. Connect the connector hose (8) to the filter pump outlet connection.

4. Open the plunger valves to allow the water to flow.

SETUP INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Page 10