Intex Recreation CS8110 (8), Drawing #1, SALTWATER, (32mm) HOSE

(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/28/2010

English 131

SETUP INSTRUCTIONS

IMPORTANT

•The Saltwater System requires a separate filter pump [700~4000 gph (2650~15140 lph)] to drive the water and function properly.

•The Saltwater System must be installed as the last piece of pool equipment in the water return line to the pool as displayed in Drawing #1. This location extends the life of the titanium plates.

1. Assemble the above-ground-pool (AGP) and its filter pump according to their installation instructions.

2. Take the Saltwater System and its accessories out of the packaging.

3. Place the Saltwater System in line after the filter pump.

4. Connect the connector hose (8) to the Saltwater System inlet.

Connecting the system to pump and pool with 1-1/4” (32mm) connections/hoses:

The saltwater system features 1-1/2” (38mm) connections. It is accordingly supplied with adaptors A (1) and B (9) for connecting to the small 1-1/4” (32mm) diameter connections/hoses. Install as follows:

Drawing #1

WATER TO

POOL	WATER FROM
	POOL
SWIMMING POOL
	ID 1-1/4”
	(32mm) HOSE

FILTER

PUMP

ID 1-1/4” (32mm)

HOSE	SALTWATER
	SYSTEM
	9
	1

SETUP INSTRUCTIONS

8

9

SAVE THESE INSTRUCTIONS

Page 8