(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/28/2010
English 131
HOW THE CHLORINE IS GENERATED
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water to make it slightly salty.The pool water flows through the Saltwater System ’s electrolytic cell to produce chlorine. The chlorine dissolves in the water and instantly starts destroying bacteria and algae. It also oxidizes all other organic materials.
HOW COPPER IONS ARE GENERATED
Low voltage direct current is applied to the copper electrode, and copper ions are generated and dissolved instantly in the water. Copper is an effective algaecide, which will prevent algae from growing in the pool.
PRODUCT SPECIFICATIONS
Power: | 110 - 120 Volt AC |
|
Amperage: | 1.1A |
|
Wattage: | 125W |
|
Ideal Salt Level: | 3000 ppm (parts per million) | |
Maximum Chlorine Output/hour: | 12 grams/hour |
|
Copper Ionizer Output Current: | 175 mA |
|
Minimum Flow Rate: | 700 ~ 4000 gallons/hour (2650 - 15140 liters/hour) | |
Limited Warranty: | 2 Years (see “Limited Warranty”) | |
| Copper electrodes | Electrolytic Cell | Flow Sensor |
PRODUCT INFORMATION/SPECS
SAVE THESE INSTRUCTIONS
Page 7