Intex Recreation HT30220 Electric Pool Heater Stationary Mounting Option, Save These Instructions

ELECTRIC POOL HEATER STATIONARY MOUNTING OPTION

(114) ELECTRIC POOL HEATER ENGLISH 7.5” X 10.5” PANTONE 295U 12/18/2006

114

ELECTRIC POOL HEATER STATIONARY MOUNTING OPTION

Some countries, especially in the European community, require the electric pool heater to be secured to the ground or to a base in a permanent upright position. Check your local authorities to determine if there is a regulation in your area regarding above-the-ground swimming pool electric pool heaters. If yes, then the electric pool heater can be mounted to a platform using the two holes located in the base. See drawing below.

The electric pool heater can be mounted on a cement base or onto a wooden platform to prevent accidental falling over. Total assembly must exceed 18kg. The European norm EN 60335-2-41 requires this product be secured to the ground or to a base.

1.The mounting holes are 6.4mm in diameter and spaced 156 mm apart.

2.Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.

SAVE THESE INSTRUCTIONS

Page 9