Replacing the Casters, Front Caster, Rear Caster | Invacare 440

SECTION 8—MAINTENANCE

Replacing the Casters

WARNING

This procedure MUST be performed by a qualified technician.

Front Caster

NOTE: For this procedure, refer to FIGURE 8.3.

1.Remove the locknut, washer, spacer and socket screw that secures the front caster to the caster support plate.

2.Remove the existing front caster.

3.Reverse STEPS 1‐2 to install the front caster.

	Socket
	Screw
Caster Support	Front
Plate	Caster
Spacer

Washer

Locknut

Rear Caster

NOTE: For this procedure, refer to

FIGURE 8.4.

1.Remove the hex bolt, two washers, spacers and locknut that secure the rear caster to the caster support plate.

2.Remove the existing rear caster.

3.Reverse STEPS 1‐2 to install the rear caster.

FIGURE 8.3 Replacing the Casters - Front

Caster

Hex Bolt

Washer

Caster Support Plate

Spacers

Rear

Caster

Washer

Locknut

FIGURE 8.4 Replacing the Casters - Rear

Caster

Part No 1141431

35

Reliant™ 440

Image 35

Invacare 440 manual Replacing the Casters, Front Caster, Rear Caster

Contents

Reliant Patient Lift Accessories Warning Symbol Legend Table of Contents Using the Patient Lift AS a Standing AID Meaning Special Notes Label Location Reliant 440 Patient Lift Typical Product Parameters Assembling the Lift Weight LimitationUsing the Sling General Guidelines Lifting the Patient Operating the Lift Transferring the Patient Performing Maintenance Assembling the Patient Lift Assembly Assembling the Patient Lift Attaching the Kneepad Attaching the Kneepad Attaching the Battery Attaching the Battery Mounting the Battery Charger Mounting the Battery Charger Locking/Unlocking the Rear Casters OperationIntroduction Operating the Patient Lift Closing/Opening Leg Base Using the Emergency StopRaising/Lowering the Patient Lift Primary Emergency Release Activating a Mechanical Emergency Release Charging the Battery Charging the Battery Lifting Preparation Transferring from Lifting the Patient Lifting the Patient Moving the Patient Transferring Patient To Wheelchair Transferring to Transferring Patient To Wheelchair Transferring Patient to Bed Transferring Patient to Bed Transferring Patient to Commode Standing Procedure Using the Patient Lift AS a Standing AID Do not lift the patient Symptoms Faults Solution Troubleshooting Institutional Inspect/Adjust Monthly MaintenanceSafety Inspection Checklists Inspect/Adjust Initially In-Home Inspect/Adjust Every Six Months Detecting Wear and Damage Care and Maintenance of Stand-Up LiftCleaning the Sling and the Lift Replacing Electric Actuator This procedure Must be performed by a qualified technician Replacing Electric Actuator Maintaining the Base Adjustment Rear Caster Replacing the CastersFront Caster USA Limited Warranty