Invacare 6210, 6211 manual Wheels Figure, Replacing The Wheel

WHEELS (FIGURE 3)

Replacing The Wheel

NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.

1.Remove the set screw from the wheel insert.

2.Perform one (1) of the following:

One-Way Wheels: Remove the existing mounting screw, washer and spacer that secure the existing one-way wheel to the wheel insert.

Two-Way Wheel: Remove the existing mounting screw, washer, bushing and spacer that secure the existing two-way wheel to the wheel insert.

3.Remove EXISTING wheel and discard.

4.Reverse STEPS 1-2 to install the NEW wheel.

Replacing The One-Way Wheels With Two-Way Wheels

NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.

NOTE: two way wheels are shipped assembled to the wheel insert.

1.Remove the mounting screw, washer and locknut securing the one-way wheel and EXISTING wheel insert to the tube frame.

2.Remove the one-way wheel and EXISTING wheel insert and discard.

3.Insert the NEW wheel insert with two-way wheel into the tube frame and secure with mounting screw, washer and locknut.

6