REPLACING THE WALKER PAD (FIGURE 5)

NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.

1.Separate the hook and loop strips and remove the pad cover.

2.Remove the EXISTING walker pad crossmember.

3.Slide the NEW walker pad over the crossmember.

4.Reinstall the pad cover and secure with hook and loop strips.

Pad Cover

Hook and Loop Strips

 

 

Walker Pad

Crossmember

 

FIGURE 5 - REPLACING THE WALKER PAD

INSTALLING THE CRUTCH TIPS (FIGURE 6)

NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.

NOTE: Rear wheels are determined from the users position.

1.Remove the rea r wheel. Refer to REPLACING THE WHEEL in this instruc- tion sheet.

2.Slide crutch tip on to the wheel insert in the rear frame tube.

3.Repeat STEPS 1-2 on remaining rear wheel.

9

Page 9
Image 9
Invacare 6211, 6210 manual Replacing the Walker PAD Figure, Installing the Crutch Tips Figure