Invacare 6211, 6210 manual Bushing

	Mounting	Tube Frame
Bushing	Screw	Washer
(Two-Way Wheel Only)
Wheel	Spacer	Locknut
Mounting		Wheel Insert
Screw
Washer		Set Screw

FIGURE 3 - REPLACING THE WHEELS/REPLACING THE ONE-WAY

WHEELS WITH TWO-WAY WHEELS

CONVERTING THE REVERSE POSTURAL (PULLING) WALKER TO A FOWARD (PUSHING) WALKER (FIGURE 4)

NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.

NOTE: Walker is shipped in the reverse postural (pulling) walker configuration.

NOTE: Right, Left, Front, and Rear sides are determined from using the walker in the reverse postural (pulling) configuration.

NOTE: Two (2) of the four (4) wheels provided with the walker are "one-way" wheels, which roll in only one (1) direction. This allows the walker to be used as either a reverse postural (pulling) walker, or a forward (pushing) walker.

NOTE: On a reverse postural (pulling) walker both of the one-way wheels are mounted to the rear frame tubes. On a forward (pushing) walker both one-way wheels are mounted to the front frame tubes.

NOTE:Takenoteofthelocationandorientationoftheone-waywheelsbeforeremoval.

NOTE: When installing the one-way wheels into the front frame tubes, their position is reversed in order to change the direction of rotation.

7