SD Memory Card

An SD Memory Card is included in the unit purchased. It allows you to store up to 99 Memory Programmes in the oven.

Use the card when storing or recalling Memory Programmes.

You can record the Memory Programme data onto your SD Memory Card using your personal computer. Refer to Storing Programme Data on SD Memory Card on pages 75 - 77.

How to insert / remove the SD Memory Card

Before you insert / remove an SD Memory Card, always disconnect the oven from the power supply.

If this is not possible, the display window should be blank, otherwise, the data on the SD Memory Card may be damaged.

How to remove

1. Unscrew the SD Card Cover and remove it.

2. Push the SD Memory Card with your finger to draw it out. Then, remove it.

How to insert

1. Insert an SD Memory Card with its label facing up as indicated by mark until it snaps into place.

2. Fit the left edge of the SD Card Cover. Screw to close at the right-hand side.

Caution:

1.Always close the SD Card Cover except when an SD Memory Card is inserted/removed in order to prevent water or dust from entering.

2.Insert only an SD Memory Card specified for this oven. Do not use any other type or substitute SD Memory Card.

3.Keep the removed SD Memory Card away from static electricity.

4.Do not disassemble or modify SD Memory Cards.

5.Do not apply a physical shock to SD Memory Cards. Do not bend, drop, or get them wet.

6.Do not touch the metal terminals of an SD Memory Card with your hand or metal.

7.Do not remove the label. Do not paste another label onto the SD Memory Card.

8.Do not leave SD Memory Cards in locations subject to high temperatures or direct sunlight.

9.Do not leave SD Memory Cards in locations subject to corrosive gases.

10.If the SD Memory Card is lost or becomes faulty, please contact a Service Engineer to obtain a replacement.

74

Page 76
Image 76
Panasonic NE-C1275 operating instructions How to insert / remove the SD Memory Card