Invacare At'm manual REMOVING/INSTALLING the Drive Wheels

SECTION 10—WHEELS AND CASTERS

REMOVING/INSTALLING THE DRIVE WHEELS

WARNING

Maintain tire pressure at 30 p.s.i.

NOTE: For this procedure, refer to FIGURE 10.3.

REMOVING

1.Disengage the motors. Refer to Engaging/Disengaging the Motors on page 39.

2.Push and hold the quick-release button on the drive wheel and pull the drive wheel out of the wheelchair frame.

3.Repeat STEPS 1-2 for the other drive wheel.

INSTALLING

1.Align drive wheel axle with the wheelchair frame.

2.Push and hold the quick-release button on the drive wheel and push the drive wheel into the wheelchair frame.

3.Engage the motor. Refer to Engaging/Disengaging the Motors on page 39.

4.Repeat STEPS 1-3 for the other drive wheel.

WARNING

Pull the drive wheel to ensure that the drive wheel is locked in place before operat- ing the wheelchair - otherwise serious injury or damage may occur.

SIDE VIEW	Motor Engagement Handle
	in the Disengaged Position
Quick-Release	Drive Wheel
Button

TOP VIEW

Wheelchair	Drive Wheel Axle
Frame

Drive Wheel

FIGURE 10.3 - REMOVING/INSTALLING THE DRIVE WHEELS

At’m 42 Part No. 1125035