SECTION
REPOSITIONING THE JOYSTICK
NOTE: For this procedure, refer to FIGURE 7.2.
1.Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 32.
2.Cut the
3.Pull the hook and loop strap to open the basket upholstery flap.
4.Cut the tie wrap that secures the joystick cable to the wheelchair frame.
5.Remove the two
6.Remove the joystick and mounting bracket assembly.
7.Reposition the joystick and mounting bracket assembly on the opposite arm.
8.Align the mounting holes on the mounting bracket with the mounting holes on the arm.
9.Insert the two (2)
10.Tie wrap the joystick cable to the wheelchair arm and frame.
NOTE: Route the joystick cable under the basket upholstery flap to prevent it from interfering with wheelchair motion.
11. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 32.
Mounting |
| Mounting |
|
| Hole on Arm |
| |
Bracket |
|
| |
|
|
| |
Joystick |
|
|
|
|
| DETAIL “A” |
|
Mounting Holes | Quick- | Joystick | |
on Bracket | Release Pins |
|
|
|
| Joystick | Basket |
|
| Upholstery | |
|
| Cable | |
|
| Flap | |
|
|
|
FIGURE 7.2 - REPOSITIONING THE JOYSTICK
Part No. 1125035 | 33 | At’m |