SECTION 2—OPERATION

3. Move the bed in a straight line about three feet backward or forward to lock.

NOTE: This action will keep the caster from swiveling and allow better forward and backward movement. The bed can now be moved with greater stability.

4. Push the bed from the foot end.

WARNING

Ensure that all four casters are locked and that the bed does not move before transferring. DO NOT transfer occupant if bed is not stable.

NOTE: The locking function holds the bed motionless when the bed is parked.

Press HERE to lock

Control

PanelDETAIL “A” -

UNLOCKED

Press HERE to unlock

Control

Panel

DETAIL “B” -

LOCKED

FIGURE 2.3 Locking the Casters

Unlocking the Casters

NOTE: To allow the bed to be rolled next to a stretcher, unlock all four casters. 1. Step down on the back of the control pedal on each caster.

Adjusting Bed Rail

WARNING

Make sure side rails are securely locked into position. Otherwise, an injury or accident may occur.

NOTE: For this procedure, refer to FIGURE 2.4 on page 18.

NOTE: Head end side rails are located on each side of the bed. Side rails have a three‐position vertical adjustment.

1.To raise or lower bed rail, grab top section of rail with one hand while pulling the release knob with the other hand.

2.Pull bed rail up or down as required.

3.Allow the release knob to spring back into locked position.

Part No 1143215

17

BAR750

Page 17
Image 17
Invacare BAR750 manual Adjusting Bed Rail, Unlocking the Casters