Invacare BAR750 SECTION 4PACKAGING, HANDLING AND SET-UP

SECTION 4—PACKAGING, HANDLING AND SET-UP
BAR750 22 Part No 1143215
SECTION 4—PACKAGING,
HANDLING AND SET-UP
Receiving
1. Countcartonsbeforesigningshippingpapers.
2. Designatesomeoneatthefacilitytoreceive���andinspectallmerchandise.Usethe
masterorderacknowledgmenttocheckoffitemsastheyarereceived.
3. Comparethenumberofcartonsshippedwiththenumberofcartonsactuallyreceived
andnotesuchontheconsigneecopyofthefreightbill.Makesuretohavethetruck
driversignthecopyacknowledgingthecount.
4. Ifshortageoccurs,IMMEDIATELYcontactInvacareat(800)333‐6900.
 WARNING
DO NOT plug the power cord into a power source until assembly is complete. To
do so could result in damage or personal injury.
DO NOT attempt to operate bed controls prior to completion of assembly.
Otherwise, damage to bed components may occur.
Set-Up
Assembling the Bed
 WARNING
DO NOT attempt to operate bed controls prior to completion of assembly as
damage to bed components or personal injury may occur.
NOTE:Forthisprocedure,refertoFIGURE 4.1onpage24.
1. Removepackingbandsfromthebed.SeeDetail“A” ofFIGURE 4.1.
2. Graspcastormountonhead‐endsectionofbed.
3. Pullsectionupandflipitoveruntilwheelstouchthefloor.
4. Grasptheback‐restofhead‐endsectionandrotateituntilthesectionrestsonthe
framesectionalreadyonfloor.SeeDetail“B”ofFIGURE 4.1.
5. Locatetwoclevispins(oneeachsideofbed)onbackrestofhead‐endsectionwhich
connectshippingbracetobed.SeeDetail“C”ofFIGURE 4.1.
6. Removetheclevispinfromthebedandpackingbrace.
7. RepeatSTEP6and7fortheotherside.
NOTE:Saveclevispinstoassemblethebed.