SECTION
SECTION 5—MAINTENANCE
Maintenance Checklist
Invacare recommends the following maintenance procedures be conducted at least once every three years. This form is provided as a guide to help with documentation.
Mechanical Inspection and Maintenance
❑Inspect all bed components for damage or excessive wear.
❑Visually examine all welds for cracks.
❑Inspect the head and foot spring sections for bending, warping or damage.
❑Check drive shaft and drive shaft connections for bending, damage or excessive wear.
❑Inspect pull tubes and mounting hardware for bending, damage or excessive wear.
❑Inspect all bolts and rivets to ensure that they are securely tightened and functioning properly.
❑Check casters to ensure they lock, if applicable, and roll properly.
❑Ensure casters are free of debris.
Electrical Inspection and Maintenance
❑Inspect all electrical bed components for damage or excessive wear (i.e., cracked or broken housings, or worn components).
❑Check pendant, power and motor cords for chafing, cuts or excessive wear.
❑Make sure all plugs are fully attached and free of damage.
❑Check all functions (head, foot, and bed ends raise and lower properly).
Pass/Fail
❑PASS:Bed and all components have passed all of the above inspection criteria and the bed is ready for placement into a client’s home.
❑FAIL:Bed, or any component, has failed any of the above inspection criteria. Tag the bed or component with a complete description of the failure(s) and have the bed serviced.
Part No 1143215 | 27 | BAR750 |
