Invacare Infinity LoBack Support manual Adjusting the Angle Figure, Adjusting the Lateral Supports

ADJUSTING THE INFINITY LOBACK PROCEDURE 4

ADJUSTING THE ANGLE (FIGURE 4)

NOTE: Refer to the INSTALLATION AND STABILITY WARNINGS in the SAFETY SUMMARY of this manual.

1.Remove the back cushion from the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.

2.Loosen the two (2) mounting screws on the two (2) angle brackets.

3.While standing behind the wheelchair, perform one

(1) of the following:

A.ToINCREASEtheangleoftheInfinityLoBack,grasp the TOP of the Infinity LoBack and pull BACK.

NOTE: Modesty flap and fixed flap not shown for clarity.

B.To DECREASE the angle of the Infinity LoBack, grasp the TOP of the Infinity Loback and push

FORWARD.

4.Torque the two (2) nuts on the two (2) angle brackets to 45-50 in./lbs.

5.Reinstall the back cushion onto the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.

ADJUSTING THE LATERAL

SUPPORTS

NOTE: Refer to the INSTALLATION AND STABILITY WARNINGS in the SAFETY SUMMARY of this manual.

A D J U S T I N G

T H E

L O B A C K

TO DE-

CREASE

ANGLE:

Grasp Here

and Push

FORWARD

Mounting

Screw

TO DE-

CREASE

ANGLE:

Grasp Here

and Push

FORWARD

TO INCREASE

ANGLE:

Grasp Here

and Pull

BACK

Angle Bracket

SIDE VIEW

TO INCREASE

ANGLE:

Grasp Here

and Pull

BACK

Adjusting the Width (Figure 5)

1.Remove the back cushion from the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.

2.Loosen, but DO NOT remove the two (2) mounting screws that secure the lateral support to the back panel.

3.Position the user in the wheelchair.

4.Slide one (1) lateral support to the desired location.

5.Torque the two (2) mounting screws that secure the lateral support to the back panel to 45-50 in./lbs.

6.Repeat STEPS 1-4 for the remaining lateral support.

7.Reinstall the back cushion onto the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.

Back Panel

Slide Lateral

Support to the

Desired Location

Lateral

Support

Mounting

Screws

FIGURE 4 - ADJUSTING THE ANGLE

NOTE: Modesty flap and fixed flap not shown for clarity.

FIGURE 5 - ADJUSTING THE WIDTH

13