PREPARING THE INFINITY LOBACK FOR INSTALLATION | PROCEDURE 2 |
7.Make sure the hook and loop fasteners meet by firmly pushing the TOP of the modesty flap and the BOT- TOM of the cushion together.
Removing
1.Grasp the modesty flap AND the fixed flap.
2.Pull UP to release the two (2) hook and loop fasten- ers on the TOP of the modesty flap from the two (2) hook and loop fasteners on the BOTTOM of the cush- ion (DETAIL “B”).
2.Fold the modesty flap AND the fixed flap over the FRONT of the cushion.
3.Grasp the two (2) folding hook and loop fasteners on the cushion and pull UP to release them from the two
(2) hook and loop fasteners on the BACK of the back panel (DETAIL “A”).
4.Grasp the cushion and pull it away from the back panel to release the remaining hook and loop fasten- ers on the cushion and back panel (DETAIL “A”).
5.Remove the cushion.
INSTALLING/REMOVING THE MODESTY FLAP (FIGURE 3)
NOTE: Refer to the INSTALLATION AND STABILITY WARNINGS in the SAFETY SUMMARY of this manual.
Installing
1.Align the hook and loop fasteners at the TOP of the REAR side of modesty flap with the hook and loop fasteners at the BOTTOM of the FRONT side of the fixed flap (DETAIL ”A”).
2.Make sure the hook and loop fasteners meet by firmly pushing the TOP of the modesty flap and the BOT- TOM of the fixed flap together (DETAIL “A”).
3.Align the two (2) hook and loop fasteners at the TOP of the FRONT side of the modesty flap with the two
(2) folding hook and loop fasteners at the BOTTOM of the REAR side of the cushion (DETAIL “B”).
4.Make sure the hook and loop fasteners meet by firmly pushing the TOP of the modesty flap and the BOT- TOM of the cushion together, making sure the hook and loop fasteners meet (DETAIL ”B”).
Removing
1.Grasp the two (2) hook and loop fasteners at the TOP of the FRONT side of the modesty flap and pull UP to release them from the two (2) hook and loop fastener at the BOTTOM of the REAR side of the cushion (DETAIL “B”).
2.Grasp the modesty flap and pull DOWN to release the hook and loop fasteners at the TOP of the REAR side of the modesty flap from the hook and loop fas- teners at the BOTTOM of the FRONT side of the fixed flap (DETAIL “A”).
3.Remove the modesty flap.
DETAIL “A”
NOTE: The hook and loop fasteners on the front side of the fixed flap are not shown for clarity.
Hook and Loop
Fasteners
Bottom of
Fixed Flap
Top of Modesty Flap
Rear Side
DETAIL “B”
Folding Hook and
Loop Fasteners
Bottom Of
Cushion
Top of
Modesty
Flap
Hook And Loop Fasteners
P R E P A R I N G
T H E
L O B A C K
F O R
I
N S T A L L A T I O N
FIGURE 3 - INSTALLING/REMOVING THE
MODESTY FLAP
9
