![](/images/new-backgrounds/1315283/31528319x1.webp)
SECTION 1—GENERAL GUIDELINES
DO NOT attempt to repair product.
DO NOT immerse product in any kind of liquid.
Store product in a clean area when not in use.
NEVER smoke in an area where oxygen is being administered.
NEVER use aerosol sprays near the equipment.
ALWAYS confirm prescribed dose before administering to patient and monitor on a frequent basis.
DO NOT use if dirt or contaminants are present on or around cylinder, valve, product or connecting devices.
Not suitable for use in the presence of flammable anesthetic mixture.
NEVER use near any type of flame or flammable/explosive substances, vapors or atmosphere.
ALWAYS follow ANSI and CGA standards for Medical Gas Products and Flowmeters (E‐7) and Oxygen Handling (G‐4).
NO OXYGEN is delivered when the pointer is aligned with “Off”.
DO NOT block the outlet fitting or kink the cannula when the product is in use, this may damage the unit.
The use of this device is limited to the oxygen patient. Cylinders MUST be used only by the oxygen patient and are not to be distributed to any other individual for any purpose.
This product is NOT to be used by patients who breathe through their mouths.
DO NOT use a humidifier with this product.
Pneumatic Oxygen Conserver | 10 | Part No 1160840 |