Manuals / Invacare / Fitness & Sports / Camping Equipment

Invacare MA90Z manual Label Location, NOTE MA95Z only

Models: MA95Z

1 28

Download 28 pages 24.06 Kb

Page 7

Image 7

LABEL LOCATION

DANGER-EXPLOSION HAZARD: DO NOT use in the presence of flammable anesthetics.

CAUTION: Equipment should be connected to a properly grounded receptacle (3-prong). Risk of Electrical shock. DO NOT remove back. Disconnect air hose before administering CPR.

ATTENTION

Clean Filter Every 5 months and Whenever Dirty. Remove Filter, Wash, Dry & Replace.

NOTE: MA95Z only.

NOTE: This label is on the back of the unit and also contains the serial number.

WARNING

Patient entrapment with bed side rails may cause injury or death. Mattress MUST fit bed frame and side rails snugly to prevent patient entrapment. Follow the manufacturer’s instructions. Monitor patient frequently. Read and understand the Owner’s/Operator’s Manual prior to using this equipment. Invacare product manuals are available at www.invacare.com or your dealer.

Label part number 1150708 Rev A

NOTE: This label is on the foot end of the mattress cover (not shown).

Part No 1148139

MA90 Series

Page 7

Image 7

Invacare MA90Z Label Location, NOTE MA95Z only, NOTE This label is on the foot end of the mattress cover not shown

Contents

MA95Z Alternating Rotation and True Low Air Loss System Owner’s Operator and Maintenance ManualMA90 Series MA90Z Alternating Rotation with On Demand True Low Air Loss SystemSPECIAL NOTES ACCESSORIES WARNINGTYPICAL PRODUCT PARAMETERS TABLE OF CONTENTSSPECIAL NOTES REGISTER YOUR PRODUCTSECTION 3-MAINTENANCE AND TROUBLESHOOTING REGISTER YOUR PRODUCTTABLE OF CONTENTS Register ONLINE at warranty.invacare.comElectrical Parameters TYPICAL PRODUCT PARAMETERSPerformance Parameters CONTROL UNIT WEIGHT Mechanical ParametersEnvironmental Parameters CONTROL UNIT DIMENSIONS L X W X HNOTE MA95Z only LABEL LOCATIONNOTE This label is on the foot end of the mattress cover not shown Entrapment May Occur InstallationSECTION 1-GENERAL GUIDELINES ContraindicationsAnesthesia Equipment Fire HazardElectrical DANGER SmokingSECTION 2-OPERATION Installing the Mattress Replacement SystemNOTE For this procedure, refer to FIGURE NOTE The powered mattress comes with ten nylon buckle strapsNOTE For this procedure, refer to FIGURE Installing the Side RailsInstalling the Power Unit NOTE Mattress cover not shown for clarityNOTE For this procedure, refer to FIGURE Connecting the HoseConnecting the Power Cord Power Button Using the Front PanelNOTE For this procedure, refer to FIGURE Rotation Button MA95Z Turn Button MA90ZTurn Time Button MA90Z Turn Angle Button MA90ZAbout Automatic Wireless Mode Automatic Wireless FowlerHold Button MA95Z Firm/Soft ButtonsProgramming the Automatic Wireless Fowler Transmitter NOTE The control unit will beep and will return to StandbySECTION 2-OPERATION Mode Button MA90ZMax Inflate Button MA95Z NOTE This will deactivate the Max Inflate LEDNOTE The Lock LED illuminates when in this mode Powering Up the SystemLock/Alarm Silence Button Power Fail LEDTransferring Patient From/To a Gurney Placing the Patient on the MattressNOTE In this mode, the Max Inflate LED lights up Transferring Patient From/To a Wheelchair Preparing for CPR ProcedureNOTE For this procedure, refer to FIGURE DETAIL “A” FIGURE 2.5 Preparing for CPR ProcedureSECTION 2-OPERATION DETAIL “B”Cleaning the System SECTION 3-MAINTENANCE AND TROUBLESHOOTINGDO NOT overload the machine Storing the SystemDO NOT use chlorine bleach because it may damage the fabric coating NOTE For this procedure, refer to FIGURE 3.1 on page TroubleshootingChanging the Filter No power MA90 Series SECTION 3-MAINTENANCE AND TROUBLESHOOTINGCanada LIMITED WARRANTY