SECTION
4.Place rear battery box onto the battery tray and connect the rear battery box to the front battery box.
5.Connect the front battery box to the controller.
WARNING
The battery box retaining strap MUST be fastened securely and adjusted prop- erly to hold battery boxes in place before using the wheelchair.
6.Connect the battery box retaining strap clip together and adjust if necessary.
To Controller |
| |
Battery | Front Battery | |
Box Connectors | ||
Tray | Rear Battery | |
Front | ||
Box Connector | ||
Battery |
| |
Box |
| |
Rear | Retaining | |
Battery | Strap | |
Box |
| |
| Retaining Strap Clip |
FIGURE 11.3 Removing/Installing the
Battery Boxes
Installing/Removing Battery Tray
NOTE: For this procedure, refer to FIGURE 11.4.
NOTE: To remove the battery tray from the wheelchair, reverse the following procedure.
1.Attach the key slot bracket located at the front of the battery tray over the crossbrace bolt bushing under the seat upholstery of the wheelchair.
2.Attach the hanger brackets to the wheelchair frame.
Crossbrace Bolt Bushing
| Key Slot Bracket |
Hanger | Wheelchair Frame |
| |
Bracket | Battery Tray |
|
FIGURE 11.4 Installing/Removing Battery Tray
Part No. 1118386 | 51 | P9000™ XDT |
