SECTION
Adjusting the Back Height
NOTE: For this procedure, refer to FIGURE 8.3.
NOTE: Back canes must be adjusted to the same height.
1.Remove the two (2) mounting screws and locknuts that secure the two (2) back canes to the wheelchair frame.
2.Reposition the back canes to the desired height adjustment position.
3.Reinstall the mounting screws and locknuts that secure the back canes to the wheelchair frame and securely tighten.
Back Cane
Wheelchair Frame
Mounting Screw | Locknut |
Back Height (in inches)
*HOLE# | 1 | 2 | 3 |
|
|
|
|
HEIGHT | 17 | 18 | 19 |
|
|
|
|
*NOTE: Holes numbered from bottom to top for reference only. (There are no numbers on the back canes or wheelchair frame.)
FIGURE 8.3 Adjusting the Back Height
P9000™ XDT | 42 | Part No. 1118386 |
