Invacare RPA600-1E Assembling the Electric Actuator to the Boom

SECTION 2—ASSEMBLY
Electric Portable Patient Lift - RPA600-1E 12 Part No 1078988
Assembling the Electric Actuator to the Boom
NOTE:Forthisprocedure,refertoFIGURE2.2.
1. Removetheshoulderbolt,washerand
nutfromthemountingbracketonthe
boomassembly.
2. Unpackthepinchguardfromthepatient
liftcarton.
NOTE:Thebottomoftheelectricactuator
assemblywillalreadybeassembledtothemast
mountingbracket.
3. Cuttheplastic‐wrapthatsecuresthe
boomandmasttogether.
4. Lift‐upontheboomandplaceitonyour
leftshoulder.FIGURE2.2 Assembling the Electric Actuator
to the Boom
5. Lettheactuatorrestonyourright‐sideofyourchestandrotatetheshaftextensionofthe
actuatorassemblyuntilitlines‐upwiththemountingholesintheboomassembly.
6. Placethepinchguardovertheshaftextensionoftheactuator.
7. Aligntheholesoftheboomassemblymountingbracketwiththoseoftheactuatorand
insertthebolt.Securewithnut.
NOTE:Besurethattheboltiscompletelythroughtheholesoftheboomassemblymountingbracketand
theactuatorassembly.Theboomassemblywillpivoteasilyifthemountinghardwareisalignedproperly
whentheboomassemblyissecuredtothemast.
CAUTION
DO NOT overtighten the nut and bolt. This damages the mounting bracket.
8. Plugintheelectricalconnectorsfromtheelectricactuatortothebottomofthebattery
assembly.
9. Plugthependantcontrolintothebottomofthebatteryassembly.
NOTE:Thebottomoftheactuatorassemblywillalreadybeassembledtothemastmountingbracket.
Pinch Guard
NOTE: Turn 90°
Mounting Bracket