Operation, Introduction | Invacare RPA600-1E guide

SECTION 3—OPERATION

Introduction

WARNING

DO NOT attempt to transfer a patient without approval of the patient’s physician, nurse, or medical assistant. Thoroughly read the instructions in this owner’s manual, observe a trained team of experts performing the lifting procedures and then perform the entire lift procedure several times with proper supervision and a capable individual acting as a patient.

The legs of the patient lift MUST be in the maximum open position for optimum stabil- ity and safety. If it is necessary to close the legs to maneuver the patient lift under a bed, close the legs only as long as it takes to position the patient lift over the patient and lift the patient off of the bed surface. When the legs of the patient lift are no longer under the bed, return the legs to the maximum open position.

NOTE: Invacare recommends that two assistants be used for all lifting preparation and transferring to/ from procedures; however, the patient lift can be operated by one assistant. The use of the patient lift by one assistant should be based on the evaluation of the health care professional for each individual case.

Operating the Patient Lift

Locking/Unlocking the Rear Casters

NOTE: For this procedure, refer to Detail A of FIGURE 3.1.

•To Lock the Caster: Push tab down.

•To Unlock the Caster: Push tab up.

Raising/Lowering the Patient Lift

NOTE: For this procedure, refer to Detail B of FIGURE 3.1.

• To Raise the Patient Lift: Press the up (Ï) button on the hand control.

NOTE: If the patient lift is raised to the highest level, it may be necessary to pull down gently on the lift arms before the mast will begin to lower. Pull down gently on both arms at the same time to avoid making the lift unstable.

• To Lower the Patient Lift: Press the down button (Ð) on the hand control.

Using the Emergency Stop

NOTE: For this procedure, refer to Detail C of FIGURE 3.1.

•Push the RED emergency button in to stop the lift arms from raising or lowering.

•To reset, rotate the emergency button clockwise.

Electric Portable Patient Lift - RPA600-1E

Part No 1078988

RPA600-1E specifications

The Invacare RPA600-1E is a versatile and innovative powered wheelchair designed with user comfort and mobility in mind. This model is engineered to provide individuals with a high level of independence, promoting an active lifestyle while ensuring safety and ease of use.

One of the standout features of the Invacare RPA600-1E is its advanced seating system. The chair comes equipped with a contour seating design that delivers excellent postural support, which is crucial for long-term comfort and well-being. Users benefit from a wide range of adjustments, allowing caregivers to customize the positioning based on individual needs. The breathable upholstery also contributes to overall comfort, reducing the risk of pressure sores during prolonged use.

The wheelchair incorporates the latest in battery technology, featuring high-capacity lithium-ion batteries that allow for longer ranges between charges. This enhancement is particularly beneficial for users who require a dependable chair for daily activities, providing the user with an extended travel range of up to 25 miles on a single charge. The quick charge capability ensures that the wheelchair is ready to go when needed.

For added safety, the Invacare RPA600-1E comes with innovative anti-tip technology and a robust frame design that offers stability on various terrains. The improved suspension system is another highlight, enabling smooth transitions over bumps and curbs, which enhances the user experience during outdoor excursions.

Another important aspect is the intuitive joystick control, which allows for precise maneuvers in tight spaces. The joystick is easy to operate, enabling users to navigate with confidence in both indoor and outdoor environments. There are additional customizable features such as programmable speed settings that allow users to adjust the chair's responsiveness according to their comfort levels.

The Invacare RPA600-1E also prioritizes user safety with features such as automatic braking, providing peace of mind on inclines or uneven surfaces. This wheelchair is compatible with various accessories and support options, allowing for further customization to meet specific needs.

Overall, the Invacare RPA600-1E is a state-of-the-art powered wheelchair that prioritizes comfort, safety, and user independence, making it an excellent choice for those seeking to enhance their mobility and quality of life.

Invacare RPA600-1E manual Operation, Introduction, Operating the Patient Lift

Models: RPA600-1E