DLP Projjjectttor – User’s Manualll
6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
7.Press the Menu button on the projector.
8.Select OSD ´ SETUP ´ Network ´ Enabled.
9.After getting into Network, input the following:
`DHCP: Off
`IP Address: 10. 10. 10. 10
`Subnet Mask: 255.255.255.0
`Gateway: 0.0.0.0
`DNS Server: 0.0.0.0
10.Press
(Enter) / ► to confirm settings.
11.Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
12. In the Address bar, input the IP address: 10. 10. 10. 10.
– 29 –
