Knoll Systems HDO2200 Adjusting the Projector Level, DLP Projjjectttor - User’s Manualll

DLP Projjjectttor – User’s Manualll

Adjusting the Projector Level

Take note of the following when setting up the projector:

•The projector table or stand should be level and sturdy.

•Position the projector so that it is perpendicular to the screen.

•Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection angle.

•Ensure the cables are in a safe location. You could trip over them.

1.

2.

3.

To raise the level of the projector, lift the projector [A] and press the height-adjuster button [B].

The height adjuster drops down [C].

To lower the level of the projector, press the height-adjuster button and push down on the top of the projector.

To adjust the angle of the picture, turn the tilt-adjuster [D] right or left until the desired angle has been achieved.

– 13 –