INSTALLATION
SECTION 2— INSTALLATION
Introduction
WARNING
Use only Invacare parts in the assembly of this lift. The base legs, mast, and boom assembly and the swivel bar are manufactured to specifications that assure correct alignment of all parts for safe functional operation.
Assembling the Mast to the Base
WARNING
The mast may be removed from the base for storage or transporting. Each time the mast is removed and returned to the base, the mast MUST be properly secured to the base assembly.
NOTE: For this procedure, refer to FIGURE 2.1.
1.If locking‐type casters are on the lift, lock them.
2.Remove the shoulder bolt, nut and washer, that secures the mast in the U‐shape cut‐ out of the base.
3.Position the mast in an upright position and place the mast into the U‐shaped cut‐out of the base.
4.Insert shoulder bolt with washers through the base and mast.
5.Secure with nut.
Mast | Washer |
|
Shoulder
Nut
Bolt | |
|
FIGURE 2.1 Assembling Mast to Base
Stand Up Lift Model | 14 | Part No. 1145811 |
