Invacare RPS350-2 Replacing Forks

MAINTENANCE
Part No. 1145811 37 Stand Up Lift Model RPS350-2
Replacing Forks
 WARNING
Ensure that there is sufficient room to turn stand up lift on its side and that floor
area is clear of debris. Otherwise, injury to personnel or damage to stand up lift may
occur.
NOTE:Forthisprocedure,refertoFIGURE 7.7andFIGURE 7.8onpage36.
1. Placethestandupliftonitsside.
2. Removethefrontorrearcasterfromthelift.RefertoReplacingCasters/Forkson
page 36.
3. Unscrewtheexistingforkfromthebase.
4. Installthenewforkontothebase.
5. Installthefrontorrearcasterontothestanduplift.RefertoReplacingCasters/Forks
onpage 36.
6. Standthestandupliftbackup.