Invacare TRACER EX Installing the Telescoping I.V. ROD, Knob, Upper Rod Attachment Back Cane

PROCEDURE 9 OPTIONS

O P T I O N S

INSTALLING THE TELESCOPING I.V. ROD

NOTE: Flip-back style arms will not flip back when used on the same side of the wheelchair as the telescoping I.V. rod.

Installing Ther telescoping I.V. Rod on Non- Transport Wheelchairs Only (FIGURE 1)

1.Determine if the telescoping I.V. rod will be mounted on the right or left side of the wheelchair.

NOTE: The telescoping I.V. rod is factory set for installation onto either the right side of a wheelchair with back upholstery mounted to the front of the back canes OR the left side of a wheelchairwithbackupholsterymountedtothebackofthe back canes. Refer to REPOSITIONING THE UPPER ATTACHMENT in this instruction sheet if any other mounting position is desired.

2.Position the I.V. rod mounting bracket on the step tube on the side determined in STEP 1.

3.Loosely install the lug screw, spacer and locknut that secure the mounting bracket to the back cane.

4.Remove the top phillips screw and washer from the back upholstery.

5.Line up the mounting holes in the back cane, back upholstery and upper attachment.

Adjustment		MOUNTING THE
		I.V. ROD ON THE
Knob			RIGHT SIDE
Upper			I.V. Rod
Attachment			Back Cane
I.V. Rod			Back
Support Tube
			Upholstery
I.V. Rod
Mounting Bracket			Washer
(STEP 2)
Lug Screw			Phillips
(STEP 3)			Screw
Spacer
(STEP 3)	Locknut
	(STEP 3)		Step Tube
Back Upholstery			MOUNTING THE
		Back	I.V. ROD ON THE
			LEFT SIDE
		Cane

6.Reinstall the washer and phillips screw and securely tighten.

7.Securely tighten all attaching hardware.

8.Loosen the adjustment knob and position the I.V. rod to the desired height and securely tighten the adjust- ment knob.

Upper Attachment

Phillips Screw

Washer

FIGURE1-INSTALLINGTHETELESCOPINGI.V.ROD

ON NON-TRANSPORT WHEELCHAIRS ONLY

28