Invacare TRACER EX manual Repositioning The Upper Attachment Figure, Outer Tube Phillips Screw

PROCEDURE 9 OPTIONS

O P T I O N S

Repositioning The Upper Attachment (FIGURE 3)

1.With the Telescoping I.V. rod in the lowest position, align the hole of the outer tube with the phillips screw of the inner tube. Remove phillips screw and set aside.

2.Remove the inner tube from the outer tube.

NOTE: Take note of the position and orientation of the height adjustment assembly before removing. The height adjustment assembly must be positioned to face away from the wheelchair when installed.

3.Firmly grasp the height adjustment assembly and Pull to remove from the outer tube.

4.Slide the upper attachment UP off of the outer tube.

5.Rotate the upper attatchment 180° and reinstall onto the outer tube.

6.Reverse STEPS 1-4 to reassemble the telescoping I.V. rod.

Inner Tube

Upper Attachment

Height Adjustment(Shown rotated 180°)

Assembly

Hole Outer Tube

Outer Tube

Phillips Screw

FIGURE 3- REPOSITIONING THE UPPER

MOUNTING BRACKET

30