Invacare User guide manual Installing / Removing or Adjusting Headrest if fitted, Removal

7.4Installing / Removing or Adjusting Headrest (if fitted)

CAUTION:

•After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result..

Installing

1.Ensure set screws are not protruding into headrest support tube.

2.Insert headrest assembly into headrest support tube.

3.Tighten the set screws using a hex wrench.

Removal

1.Loosen the set screws using a hex wrench.

2.Remove headrest assembly from headrest support tube.

Adjusting

1.Loosen the headrest nuts with a spanner.

2.Loosen the hand lever by turning anti-clockwise.

3.Adjust to desired position

4.Re-tighten nuts and hand lever.

Nuts

Hand Lever

Set Screws	Headrest
	Support Tube

Lateral Adjustment

Screws

47