Invacare User guide manual Installing

Installing

WARNING

•NEVER allow any of your tools and/or battery cable(s) to contact BOTH battery terminal(s)/ post(s) at the same time. An electrical short may occur and serious personal injury or damage may occur.

•The use of rubber gloves and chemical goggles is recommended when working with batteries.

CAUTION

•When connecting the battery cables to the battery(ies), the battery cable(s) MUST be connected to the battery terminal(s)/post(s) depending on battery type. ALWAYS check the battery top for POSITIVE (+) and NEGATIVE (-) marking symbols before connecting the battery cables.

1.Carefully place each battery into the tray (see figure).

2.Connect the battery retaining strap.

3.Attach the controller assembly.

4.Connect the battery cables to the battery terminals as follows:

Negative (-) BLACK battery cable to the NEGATIVE (-) battery terminal post;

Positive (+) RED battery cable to the POSITIVE (+) battery terminal post;

5.Secure the battery cables to the battery terminals, BLACK cable to NEGATIVE (-) and RED to POSITIVE (+) with the provided fasteners. Securely tighten.

64