7.5Installing / Removing or Adjusting Trunk Supports (if fitted)
CAUTION:
•After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result..
Installing
1.Ensure the trunk support fixing screws are loose.
2.Slide the trunk support clamp over the fixing tube and hold at the desired position.
3.Tighten the trunk support fixing screws using a hex wrench.
Removal | Tube |
1. Loosen the trunk support fixing screws using a hex wrench and remove the trunk support assembly.
Adjusting
1.The trunk support height can be adjusted by loosening the fixing screws and sliding the trunk support to the desired location.
2.To adjust the trunk support position laterally, remove the upholstered pad which is fixed using hook and eye fasteners.
Clamping
screws
Clamp 
Fixing screws
49
