IOGear GCS1742 user manual Firmware Upgrade Utility, Before You Begin

The Firmware Upgrade Utility

The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated process for upgrading the KVM switch’s firmware. To run the firmware, you will need to use a windows based PC with an available serial port.

The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware upgrade packages are posted on our web site as new firmware revisions become available. Check the web site regularly to find the latest packages and information relating to them:

http://www.iogear.com

Before You Begin

To prepare for the firmware upgrade, do the following:

1.From a computer that is not part of your KVM installation, go to the IOGEAR support site and select the product part number (GCS1742 or GCS1744) to get a list of available Firmware Upgrade Packages.

2.Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.

3.Use the Firmware Upgrade Cable provided with this unit, to connect to a serial port on your computer to the Firmware Upgrade Port of your switch.

33