Introduction
Front View
3
1. Port selection buttons
•Switch console only - Press selection button for less than two (2) seconds to bring only the KVM focus to the computer attached to its corresponding port
•Switch everything - Press selection button for longer than four (4) seconds to bring KVM, Audio, and USB Hub focus to the computer attached to its corresponding port.
•Press and hold port selection switches 1 and 2 for more than two seconds to start Auto Scan Mode.
1
2
4
2. Ports LEDs
The Ports LEDs are built into the port selection switches. The upper ones are the KVM port LEDs; the lower ones are the USB LEDs.
KVM LEDs
•Lights DIM ORANGE to indicate that the computer attached to the corresponding port is up and running (On Line)
6
