Hotkey Operation

USB Reset

If the USB loses focus and needs to be reset, do the following:

1.Invoke Hotkey Mode

2.Press and release F5 function key

Hotkey Beeper Control

The beep sound the KVM makes when switching can be Toggled ON and OFF by doing the following:

1.Invoke Hotkey Mode

2.Press and release B

Disable Port Switching Keys

To disable the port switching keys (Scroll Lock or Ctrl), please do the following:

1.Invoke Hotkey Mode

2.Press [X] [Enter]

Note: This procedure is a toggle. To re-enable the keys, repeat the procedure above.

Firmware Upgrade Mode

To set the GCS1772/GCS1774 in firmware upgrade mode:

1.Invoke Hotkey Mode

2.Key in: upgrade

3.Press [Enter]

Note: The front panel LEDs will flash to indicate that the KVM is in firmware upgrade mode. To exit firmware upgrade mode, you must power off the switch.

23

Page 25
Image 25
IOGear GCS1772 user manual USB Reset, Hotkey Beeper Control, Disable Port Switching Keys, Firmware Upgrade Mode