Hotkey Operation
Set Keyboard Operating Platform
The GCS1772/GCS1774 default port configuration is for a PC Compatible keyboard operating platform. If you have a MAC attached to a port, you can change a port’s keyboard operating platform configuration as follows:
1.Bring the KVM focus to the desired port
2.Invoke Hotkey Mode
3.Press and release the appropriate Function key (see table below).
*The first time that the Sun system runs from a port, you must configure its port for the Sun keyboard operating platform before you turn the system on, or else the Sun system will not start.
List Hotkey Settings
To see a list of the current hotkey settings, do the following:
1.Open a text editor (such as Notepad or Word)
2.Invoke Hotkey Mode
3.Press F4 on your keyboard to ‘paste’ this information
22
