Port Switching
There are two ways to access the computers in your
KVM setup:
·Manual switching – pressing the push-buttons
on the unit’s front panel
·Hotkey switching – entering commands from
the keyboard
Manual Switching
1. Switch console only - Press selection button
for

less than two (2) seconds

to bring only the
KVM focus to the computer attached to its
corresponding port
2. Switch everything - Press selection button for

longer than four (4) seconds

to bring KVM,
Audio, and USB Hub focus to the computer
attached to its corresponding port.
3.Press and hold port selection switches 1 and
2 for more than two seconds to start Auto Scan
Mode.
Tip: To stop Auto Scan mode, simply press any of the
port selection switches on the KVM.
14
Operation