2. MiniTower ProTM Assembly
There are two shipping boxes. One box contains the hard case and mount components. The other box contains the tripod and counterweight.
2.1. MiniTower Pro Assembly
Figure 5
Washer
#11
Figure 6
#6
1. Setup tripod. Extend tripod legs to full extension. Then lock legs using the lock knobs on sides.
Next expand the legs out to their maximum position.
2. Assemble the three prong washer and azimuth clutch lock (#11) onto the mount base
3. Carefully position telescope mount onto the tripod by aligning the three holes on the bottom of the mount base (#8) to the three level adjustment screws (#6) on the top of the tripod (#7), hold the mount with your hands.
Adjust level adjustment screws (#6) to level the mount using the bubble level on the base.
Figure 7
8
