IRIS 200 installation manual

200 Range Dialer

Installation Manual

Version 1.0

Contents

Main Page Page Contents Page 1. Introduction 1.1. About this manual 1.2. Overview IRIS Touch 200 - GSM IRIS Touch 220 - Ethernet IRIS Touch 240 - Ethernet & GPRS 1.3. System specifications 2. Before you start 3. Alarm dialer interface 4. Installing the IRIS Touch Dialer 1. Decide where to run the cables 2. Disassemble the unit 3. Mount the unit on the wall 4. Plug in the connectors 5. Install the antenna (GSM / Ethernet only) Plug the dialer cable into the alarm panel dialer. If the alarm panel has Plug the Ethernet cable into the local IP router or socket that has been 5. Configuring the IRIS Touch Dialer 6. Post installation 7. PIN alarms 7.1. Installation 7.2. Default alarm messages 8. Relay outputs 9. Troubleshooting Appendix A Settings menu Send SMS message. Send SIA format alarm over IP (trouble and restore Send Fast Format alarm over IP (alarm or Relay outputs. SMS. Page Page Iris Touch 200 Range Dialer Installation Manual14 Appendix C Specification Conformance Safety