IRIS 200 installation manual Conformance

Conformance

The IRIS range of alarm dialers comply with the following European Directives:

•1999/5/EC (Radio & Telecoms Terminal Equipment Directive).

•72/23/EEC (Low Voltage Directive).

•89/336/EEC (Electromagnetic Compatibility Directive as amended by 92/31/EEC).

Conformance to EN50131 and EN50136

The IRIS dialers are compatible with the requirements of European standards prEN50131-1 (Alarm Systems – Intrusion and hold-up systems Part 1: System Requirements) (dated Feb 2004) and EN50136-1-1 (Alarm Systems – Alarm transmission systems and equipment) (January 1998 with Amendment 1 August

2001) as follows:

•The IRIS dialers conform to Environmental Class II.

•The IRIS dialers are compliant to ATS 6 compatible with Security Grade 4.

Safety

Care should be taken when interconnecting telecommunications equipment that only like interfaces are interconnected to avoid safety hazards.

SELV:	SELV (Safety Extra-Low Voltage) is defined as a secondary circuit
	which is so designed and protected that under normal and single fault
	conditions the voltage between any two accessible parts does not
	exceed a safe value (42.4V peak or 60V dc maximum).

The interfaces on the IRIS dialer have the following safety classifications:

•Dialer Interface: SELV suitable for connection to the TNV interface of a single line telecommunications equipment such as telephones, faxes, etc.

•Data Interface: SELV suitable for connection to the SELV interface on a data terminal such as a PC COM port.

•Power Interface: SELV for connection to a DC supply.

•Inputs and Outputs: SELV for connection to alarm output and input pins.

Iris Touch 200 Range Dialer Installation Manual 15