2 | 42 |
|
|
| 7 |
| 6 | 71 |
53 71 | 64 | 53 |
|
|
www.ironmanfitness.com
ASSEMBLY FOR HANDLEBAR
Step 1:
USE | USE |
TOOL | TOOL |
6 mm | 5 mm |
36
1
Note: Do not set the handlebar post height any higher than the "STOP" line.
Loosen the knob (36) and slide the handlebar support tube (6).
Step 2:
Attach the handlebar (7) onto the handlebar support tube (6) and secure the top by using 2 shoulder bolts (42). Next, secure the front of the handlebar using allen bolt (71), spring washer (53) and arc washer (64).
Step 3:
Remove the protective cover from the backside of the adhesive tape that is located beneath the handlebar foam tab. Position tab over flat section of handlebar bracket and press down to cover the 2 shoulder bolts (42).
Step 4:
Adjust the position of the handlebar to your preference and tighten the knob (36).
Important InformationAssembly 7
