www.ironmanfitness.com
3
ASSEMBLY FOR SEAT
Step 1:
Attach the seat (38) onto the seat slide (5) and tighten using tool.
Step 2:
Attach the seat slide assembly onto the seat support post and tighten using plastic washer (37) and knob (36).
Note:
To adjust the seat slide assembly up/down, simply loosen the rear knob, slide the seat up/down and tighten the knob back after it is set in your desired position.
Note:
To adjust the seat slide assembly fore/aft, simply loosen the knob underneath the seat slide, slide the seat forward/back- ward and tighten the knob back after it’s set in your desired position.
8 AssemblyImportant Information
Note: Do not set the seat support post height any higher than the "STOP" line.
USE
TOOL
381
5 | 36 |
4 
37 
36
