www.ironmanfitness.com
How to change brake pad
To change the brake pad you must firmly hold the brake pad holder in order to unscrew. Attempting to unscrew or shift the holder may result in harmfully bending of the brake spring bar. While holding the bar, use your allen wrench and a regular wrench to unscrew bolts. Replace brake pad. Secure bolts tighlty again.
12ImportantMaintenanceInformation
Maintenance
1.After every use of your Ironman bike, use a damp cloth to wipe your unit free from sweat. You can use soap and water, or a diluted
2.Inspect the brake pad for excessive wear and replace the pad if necessary. If you need replacement, please contact Ironman Customer Service at
3.Inspect the drive belt for correct alignment, tension, or excessive wear. If you experience any slipping while pedaling, it is possible there is not enough tension on the belt. You will need to remove the plastic cover to inspect the belt. This is done by removing the 4 screws that secure the cover to the frame.
