2a. Attach the rear handlebar (22) to the seat carriage (3) with the flat washers (50) and screws (79) provided. Connect the seat cushions (9,10) to the seat car- riage (3) with the washers (78) and screws (80).
2a
2b
2b. First remove the support tube (24) from the main frame
(1). Slide the assembled seat carriage onto the car- riage tube (16).
3
3.Attach pedals (30, 31). Axles of pedals are branded “L” and “R.” The pedal marked “R” goes on the right hand side of the bike and the one marked “L” on the left hand side. Tighten the left pedal by turning
4 | 5 |
