Assembly
Getting Started - The Ironman 350r will require some assembly. Unpack the box in a clear area. Remove packing material. Do not dispose of packing material until assembly is complete and unit is working properly. Place the unit on a clean level surface for assembly. Make sure there is easy access to an electrical outlet. Before assembling, the unit should be placed as close as possible to its final location. If you are missing any parts, please call Ironman Fitness at
Figure 1
Step 1:
Remove the two hex head bolts from the front stabilizer. Attach the front stabilizer
(2)onto the front of main frame (3) using hex head screws (1), washers (4) and cap nuts (5).
Step 2:
Remove the two hex head bolts from the rear stabilizer. Attach the rear stabilizer
(8)onto the front of the main frame (3) using carriage bolts (1a) and washers (4).
