Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen. Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once the band you would like to select is displayed
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Turn the rotary TUNE KNOB to select the preset location
Recall Presets
Press the “SCAN” button. Turn the rotary TUNE KNOB to scroll through the stored preset stations. When the desired preset is displayed, press the “<<SEEK” button to select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current station. “EXIT” will be displayed when the button is pressed. You can also wait the allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen. Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once “SIRIUS” is displayed, press the “<<SEEK” button to select it.
Channel Up
Turn the TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the TUNE KNOB
Category Up
Press the “SEEK>>” button to move up through the categories.
Category Down
Press the “<<SEEK” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks.
10
