ISonic K8NF4G-SATA2 USB Configuration, Hardware Health Event Monitoring Screen, USB Controller

3.3.8 USB Configuration

	BIOS SETUP UTILITY
Advanced
USB Configuration		To enable or disable
		the onboard USB
USB Controller	[Enabled]	controllers.
USB 2.0 Support	[Enabled]
Legacy USB Support	[Disabled]
			Select Screen
			Select Item
		+-	Change Option
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

USB Controller

Use this item to enable or disable the use of USB controller.

USB 2.0 Support

Use this item to enable or disable the USB 2.0 support.

Legacy USB Support

Use this item to enable or disable the support to emulate the I/O devices of legacy OS (DOS) such as mouse, keyboard, USB flash... etc. Or you may select [Auto] so that the system will start to auto-detect; if there is no USB device connected, “Auto” option will disable the legacy USB support.

3.4Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.

		BIOS SETUP UTILITY
Main	Advanced	H/W Monitor	Boot	Security	Exit
Hardware Health Event Monitoring
CPU Temperature		: 37 C / 98 F
M / B Temperature		: 31 C / 87 F
CPU Fan Speed		: 2833 RPM
Chassis Fan Speed		: N / A
Vcore		: 1.532 V
+ 3.30V		: 3.129 V
+ 5.00V		: 4.877 V		Select Screen
+ 12.00V		: 11.741 V
				Select Item
			F1	General Help
			F9	Load Defaults
			F10	Save and Exit
			ESC	Exit
	v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
		3 5