PCIE Frequency (MHz)
Use this option to adjust PCIE frequency. The range is from 70MHz to 150MHz. The default value is [100].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration options: [Disabled], [Center Spread], and [Down Spread].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options: [Disabled], and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options: [Disabled], and [Enabled].
HT Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration options: [Disabled], [Center Spread], and [Down Spread].
Cool ‘n’ Quiet
Use this item to enable or disable AMD’s Cool ‘n’ QuietTM technology.
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Multiplier and Processor Voltage. However, it is recom- mended to keep the default value for system stability.
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode | [Auto] |
CPU Frequency (MHz) | [200] |
PCIE Frequency (MHz) | [100] |
Boot Failure Guard | [Enabled] |
CPU Spread Spectrum | [Center Spread] |
PCIE Spread Spectrum | [Enabled] |
SATA Spread Spectrum | [Enabled] |
HT Spread Spectrum | [Center Spread] |
Cool' n' Quiet | [Enabled] |
Processor Maximum Multiplier | x11 |
Processor Maximum Voltage | 1.550 V |
Multiplier/Voltage Change | [Manual] |
Processor Multiplier | [x8] |
Processor Voltage | [1.500V] |
Memory Clock | [Auto] |
Flexibility Option | [Disabled] |
Bank Interleaving | [Auto] |
Burst Length | [4 Beats] |
If AUTO, multiplier and voltage will be left at the rated frequency/voltage. If Manual, multiplier and voltage will be set based on User Selection in Setup.
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
2 6
