ITT DVD 10-101DX user manual Player Overview, Rear Panel, Connect TV

10. Right front audio output

11. S-Video output

12. Digital coaxial audio output

13. SCART output

14. Mains Switch

Player Overview

Rear Panel

1. Composite video output 2/3/4. Component video output 5. Center audio output

6. Sub-woofer audio output

7. Left surround audio output

8.Right surround audio output

9.Left front audio output

Follow these steps to connect the player to your TV set and audio system. It is recommended that you turn off power on all components while you are connecting the player.

Connect TV

Choose one appropriate video connection methods:

Stereo Audio: Connect to the left/right audio inputs of your TV set;

Composite Video: This connection is popular; you can find the composite video input jack on the back panel of most TV set. With this connection, Video Setup should be set to OFF in the VIDEO menu.

Component Video: COMPONENT connector is one of video standard in America and China. It can offer the best picture quality, and it can still transmit progress scan signal. To finish this connection you must connect the unit and TV set by using three cables, and each of component video jacks had been marked as Y/Pb/Pr(Y/Cb/Cr), please connect them one to one correctly. With this connection, Video Setup should be set to YUV in the VIDEO menu.

S-video:A TV set usually support composite video or s-video input, but s-video connection can offer better picture quality than composite video connection. With this connection, Video Setup

GB- 4