English
4 “Pair” to your Bluetooth phone
Pairing3 will create a unique and encrypted wireless link between two Bluetooth- enabled devices such as your Bluetooth phone and JABRA FreeSpeak 250.
1. Ensure the headset is off (see Turning headset on/off section).
2. Press and hold until you see a solid blue light (approximately 8 seconds), then release* (see Fig. 2).
3. | Set your Bluetooth phone to “discover” |
|
| the headset by following your phone’s |
|
| instruction guide. Typically, the steps | Fig. 2 |
| involve going to a “setup”,“connect”or |
|
| “Bluetooth” menu on your phone and |
|
| then selecting the option to “discover” a |
|
| Bluetooth device. |
|
4. | Your phone will find the “JABRA 250” |
|
| headset and ask if you want to pair with |
|
| it. Confirm this by pressing “yes” or “ok”. |
|
5. | Enter passkey or PIN4 = 0000 (4 zeros), |
|
| then press “yes” or “ok”. | Fig. 3 |
IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly before going back to flashing every 3 seconds. If unsuccessful, the light remains solid, and you’ll need to reattempt pairing (see steps
*If you have a Bluetooth phone that supports the
BASIC OPERATIONS |
|
| |||||
5 | Turning headset on/off |
| |||||
|
|
|
|
|
|
|
|
|
| What you do |
|
|
| What you hear | What you see |
Turning |
| Press and hold |
|
| for 3 to 5 | Ascending | The blue indicator |
headset on |
|
|
|
|
|
| |
| seconds until you see a | light will flash while | |||||
|
| burst of flashes on the blue | tones | the power is on (see | |||
|
| indicator light, then release |
| Status indicators | |||
|
|
|
|
|
|
| table below) |
|
|
|
|
|
|
|
|
Turning |
| Press and hold |
|
| for 3 to 5 | Descending | The blue indicator |
headset off |
|
|
|
|
|
| |
| seconds until you see a | light will stop | |||||
|
| burst of flashes on the blue | tones | flashing | |||
|
| indicator light, then release |
|
| |||
|
|
|
|
|
|
|
|
Status indicators
What you see | What you hear | Status | ||
Flashes every | Quick series of 2 tones – | Active Mode5 | ||
second | low to high pitch (when | • | Call in progress | |
| active mode starts) | • | Up to 8 hours of | |
Flashes every | Quick series of 2 tones – | Standby Mode6 | ||
3 seconds | high to low pitch (when | • | Waiting for call | |
| standby mode starts) | • | Up to 240 hours of | |
|
|
| standby time* | |
|
|
| ||
3 flashes every | 3 beeps every 30 seconds | Low Battery (in active mode) | ||
second |
| • | 3 – 5 minutes of talk time left | |
3 flashes every | 3 beeps every 5 minutes | Low Battery (in standby mode) | ||
3 seconds |
| • | 3 – 5 minutes of talk time left |
*Depending on phone type and usage.
IMPORTANT: Do not hold thebutton down for more than 3 to 5 seconds when turning the headset on or else it may go into pairing mode, and the blue indicator light will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat process for turning the headset on.
English
6 | 7 |